Dongguan Aolun precision hardware screw mould factory

东莞市奥伦精密五金螺丝模具厂从2005年开始投产，公司位于东莞市大朗镇，距离莞深高速入口仅需5分钟路程，地理位置十分优越。自从成立开始，公司就坚持“以质量求生存，以信誉求发展”的精神理念,不断完善公司体系，精益求精,不断努力进取，长期致力于螺丝模具的开发和生产，大陆首家秉承台湾、德国、韩国。三大先进技术结合实力。引台湾进技术。拥有车、铣、磨、线切割、电火花、雕刻、精研、液压等工艺的高精密机床数十台，高精密度投影仪、洛氏硬度计、维氏硬度仪、同心仪、内孔规等齐备的检测设备。有多名经验丰富的研发设计工程师及十八名专业冷镦件模具螺丝模、螺帽模、铆钉模、拉钉拉帽模、罗拉等特殊多冲程冷镦件模具、冲棒、三角模 强束 套片模 六角六片组合模  、整头模六片三角、束杆、异型强束、异型束杆套片模、花齿热墩模、汽车紧固件模具；航天紧固件模具；船舶紧固件模具；螺栓紧固件模具；不锈钢紧固件模具；垫圈套片模等。制造技师：内孔径精密度可控制在0.005mm 以内，同心度可控制在0.01mm以内。采用国外进口WC、SKD11、SKD61、SKH51、SKH55、SKH59等。

Dongguan Aolun precision hardware screw mould factory started production from 2005, the company is located in Dongguan city Dalang Town, distance Guan deep high speed entrance only 5 minutes, the geographical position is very superior. Since the establishment of the company to start, adhere to the "quality of survival, to the credibility of development" for the spirit of the idea, the company constantly improve the system, refine on, continuous efforts to forge ahead, the development and production of long-term commitment to the screw die, the mainland's first uphold Taiwan, Germany, South korea. Three the combination of advanced technology strength. Taiwan cited technology. Owned vehicles, milling, grinding, wire cutting, EDM, carving, grinding, hydraulic technology for high precision machine dozens, test equipment with high precision projector, Rockwell hardness tester, hardness tester, Vivtorinox, with the right inner hole compliance complete. A research and design more than experienced engineers and eighteen professional pieces of cold heading die screw die, nut die, Mao Dingmo, pull nails pull cap mold, roller and other special multi stroke cold forging die, punch, triangular norm strong beam set piece mold six horns and six combination mode, the whole head die six pieces, three angle rod shaped beam, strong beam, shaped beam rod sleeve piece mold, flower tooth heat flow model, auto fastener moulds; aerospace fastener moulds; ship fastener moulds; bolt fastener moulds; stainless steel fastener moulds; gasket set piece mold etc.. Manufacturing technicians: inner aperture precision can be controlled within 0.005mm, the coaxiality can be controlled within 0.01mm. The use of imported WC, SKD11, SKD61, SKH51, SKH55, SKH59 etc..